《极细同轴线运用》

Note-Book

MCC HDTVMedical MachineMobile Phone

Cable Assembly Product for NB

Coaxial type (For CCFL Panel)

M/B Side40pin 0.5pitch

INV Side20pin 0.5pitch

Panel Side30pin 1.0pitch

Cable:40awg coax. Cable & 32awg wire

Wire type (For LED backlight Panel)

M/B Side40pin 1.0pitchCable:34awg wire

Panel Side40pin 0.4pitch

Cable Assembly Product for HDTV

Cable:40awg,Conn:30pin 1.0pitch

Cable:40awgConn:51pin 0.5pitchCable Assembly Product for Mobile Phone

Cable:44awg,Conn:40pin 0.3/0.4mm pitch

Cable:44awg,Conn:40pin 0.3mm pitch

MCC Connector CN1

CN2

CN3

Applicable Cable >MCC :AWG #40 & #42 & #44Connector Pitch >0.4mm Pitch 40posMating Height >1.0mm (Max)

Source >

Plug I-PEX 20346

Receptacle I-PEX 20347

Applicable Cable >MCC :AWG #40 & #42 & #44Connector Pitch >0.4mm Pitch 40posMating Height >1.85mm (Max)Source >

Plug I-PEX 20373

Receptacle I-PEX 20374

Applicable Cable >MCC :AWG #44Connector Pitch >0.3mm Pitch 40posMating Height >1.6mm (Max)

Source >

Plug I-PEX 20395

Receptacle I-PEX 20394

Hyper Connector

Replaced Part

I-pex20346&20347For NB and mobile phone

itemPhotoDescription

0.4pitch 30&40pin wire to boardconnector0.5pitch 51pin

wire to boardconnector0.5pitch 20/30/40pin wire to boardconnector1.0Pitch30pin with latch and w/o latch wire to board connector

1

2

JAEFI-R seriesFor TV

3

HondaLVC series for

NB

4

JAE FI series for NB CCFL panel or TV

Micro Coaxial Cable Advantage-1

Better Bending Function

MCCFPC

•MCC can be rotatedin twoways,bendingtimes is 120,000Min.•FPC can only be only rotated in one way,bendingtimes is 20,000Max.

Micro Coaxial Cable Advantage-2

Better Electronic Performance

•MCC has better EMI performance than FPC

•The impedance of MCC can be controledin +/-3 ohm,FPCcan be only controledin +/-10ohm

•The highspeedperformance of MCC is better than FPC,TV mobile Phone must use MCC

Micro Coaxial Cable Advantage-3

Better Cost and Sample Lead Time

•The cost of MCC(40awg) is lower 30% than FPC

•Sample Lead time of MCC is 3-5 days,Moldexpense is about 1500RMB

•Sample lead time of FPC is 14 days ,Mold expense is about 6000RMB